Tri-colors Coextruded Filament for You to Enjoy Your Printing From Now on!

Different colors at different angles, you can see rose red, sky blue, green. Three colors are integrated in silk PLA filament, and multi-color printing can realize three colors in one model. Therefore, you will easily get all colors, even for very small prints. Printing will be full of surprises as different models will present different effects. Just enjoy your printing from now on!

Recommended Print Setting for the Silk PLA Filament

3Dgenius PLA 3d printer filament is neat on the roll and leaves the spool easily without any crossed turns. It can avoid possible thread pulling, twisting or line breaking, it will make your printing smoother. The PLA filament completely dried for 24 hours before packaging which effectively protect the silk filament from moisture, no stringing and bubble-free. You can just enjoy your printing with 3Dgenius pla filament 1.75mm from now on!

Diameter: 1.75mm(Dimensional Accuracy +/- 0.03mm)

Recommended Extrusion/Nozzle Temperature: 190°C - 220°C (374°F - 428°F)

Bed/Platform temperature: 50°C - 60°C (122°F - 140°F)

Print speed: 30-60mm/s

Nozzle≥0.4mm

High Dimensional Accuracy & No Clogging and No Bubble!

1.75mm PLA 3D printer filament with high dimensional accuracy tolerance of + / - 0.03 mm which makes the fusion between the layers very good to obtain an even better bridging result. It will resist warping and produce the cleanest, least stringing prints with glossiest finish. 3Dgenius PLA filament 1.75mm will meet your demands for printing freely. The silk PLA filament is 250g/0.55lbs. The PLA filament completely dried for 24 hours before packaging and then vacuum sealed with desiccants. The vaccum package protects the filament from moisture and makes the PLA 3D printing filament no clogging and no bubble when printing.